3 Most Common Problems & The Solutions With Exterior Masonry

Home! Well, home is the starting place of love, dreams and hope. When you paint your home, it increases the beauty. Some people only care about interior walls and they think that there is no need to paint the exterior walls. Though, at a first glance, most people will judge your home by an outer appearance. To Paint, an exterior wall is an important part of home decoration because it not only gives curb appeal but also protects your house.

It is a nightmare when a problem occurs with exterior walls. Because Exterior wall coating services need too much care and effort in protecting them from multiple elements such as sun rays, pollution, bacteria and many other. But relax, I am going to give you the best solutions for the 3 most common problems that occur with your exterior walls in this article. Read attentively…

3 Most Common Problems & The Solutions With Exterior Masonry

Remember One Thing : Preparation Is The Key!

When you’re decorating exterior walls it is the most important that you make some plan or guidelines and accordingly focus on your project. This will make sure that you’ll get the best results. However, always ensure that you’re using the right products and tools for the job as it will help you in making your job easier and will result in better finishing. Keep in mind that the primary goal of painting your exterior walls is for decoration purpose and protection. Let’s take a look at four problems and it’s solutions.

Problem 1 : Mouldy Brickwork

Cause : Mould on walls is mostly caused by penetrating damp that is getting into the exterior walls. And if you’ll not remove or treat then its growth can reoccur.

Solution : If your exterior walls have problems with mould, then treat them with the fungicidal wash. It is also preferable to apply valtti mould removal solution. Once it passes the required drying time then you can apply masonry paint.

Problem 2 : Efflorescence

Cause : Fresh stonework must be left for three months before applying any treatments. And during these months, a white powdery substance may seep out from the bricks or cement. This is because, water dissolving the salts which are found in all these materials.

So, if efflorescence is found on any old brickworks then it’s the sign of excessive moisture and the source of damp must be found for the treatment.

Solution : you should clean the efflorescence with a bristle brush and coat the area with weatherproof exterior masonry paint because after that it prevents water getting into the masonry. Also ensure that you’re using breathable masonry paint so that inside masonry won’t get trapped.

Problem 3 : Cracked And Pealing Walls

Cause : Paints can crack sometimes which exposes the exterior walls. And if the dry paint splits even by one single coat then it can lead to a complete paint failure. This mostly occurs due to low-quality paint on the wall surface or the paint spread too thin up to the surface and also painting in cold conditions.

Solution : if the cracking doesn’t go down then you can correct it by removing the flaking paint with the help of a bristle brush. Though, if the issue exposes to the substrate then take it as a time to re-paint with good quality exterior masonry paint.

Conclusion :

It is a good habit to take note of specific data sheets of the product before applying on a surface. So, always consider this before buying any new product. And if you’re unsure about the product then look for some professional’s guidance. Painting exterior masonry can protect your house and also offer curb appeal. This article describes you the three most common problems, its causes and the solutions with exterior masonry. Hope, after reading, it will be easy for you to solve your problems and save your walls. Have a healthy surrounding!

Leave a Comment